Free shipping nationwide
free returns within one month
free warranty within one year
our email address: link@oossxx.com

Blog

Reasons why the monitoring screen cannot be displayed

When you encounter the issue of the surveillance camera not outputting images in the OOSSXX surveillance camera system, there may be various reasons for this. We will explain these situations in detail:

Power supply problems: First, insufficient power supply may cause the surveillance camera to not work properly. If the surveillance camera's power supply is insufficient, the output of the switching power supply may be insufficient, causing the power supply to overheat and activate the overheating protection function. To check this problem, touch the power supply on-site. If there is abnormal heat, it is recommended to replace it with a new power supply to ensure stable power supply. OOSSXX's home wireless solar-powered, battery-powered and POE-powered security cameras can be added by inserting a SIM card and scanning the code, and crime recording is performed by consuming communication data. In addition, it has a 10,000mAh large-capacity battery power supply, and a 5W high-efficiency solar panel provides power supply to realize wireless connection of the camera, and there is no electricity bill due to solar power supply.

Camera failure: If only one camera is having problems, the most likely cause is that the camera's internal program has crashed, usually due to a problem with the reset circuit. Powering the camera off and restarting it can restore normal operation.

Power interference: When AC power is connected to the video transmission line, the electrolytic capacitors inside the surveillance camera and distributor may be charged, which may interfere with the output of the video signal. In such a case, we recommend that you contact OOSSXX customer support to resolve the issue.

Line problems: Misconnection of the line or thinness of the cable may prevent the analog camera from starting. During installation, it is important to properly place the line according to the OOSSXX company standards and use a multimeter to measure the input voltage and current of the camera.

Reset circuit problem: If there is a problem with the reset circuit of the monitoring system, you may be able to restore normal operation by removing power and restarting the monitoring system.

IP address conflict: Just like IP address conflicts in computer networks, IP address conflicts in surveillance systems can also occur. In this case, you can resolve the IP address conflict by reassigning the IP address or setting it to obtain an IP address automatically.

VGA cable problems: Finally, VGA cable problems can also cause the surveillance camera to not output images. Check whether the VGA cable is loose, gnawed by mice, or worn out. If the cable is loose, we recommend that you connect it firmly, and if the cable is damaged, we recommend that you replace it with a new VGA cable. OOSSXX's home wireless solar-powered, battery-powered, and POE-powered security cameras are equipped with remote monitoring and alarms in conjunction with smartphones, so you don't have to worry anywhere! Connect the recorder and router with a LAN cable and install the app, and you can monitor, watch, and talk with your family on various devices such as tablets, smartphones, and computers outside.

Sample block quote

Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo eu convallis vitae interdum non nisl.

Sample lookbook gallery

Sample paragraph text

Damus id ullamcorper neque. Sed vitae mid a cosmo pretium aliquet an sedo delitos. Pellentesque nulla eros accumsan quis justo at tincidunt lobortis denimes loremous. Suspendisse vestibulum lectus in lectus volutpat, ut dapibus purus pulvinar. Vestibulum sit amet auctor ipsum. Proin molestie egestas orci ac suscipit risus posuere loremous.

Share:

Older Post
Newer Post
×

Recently purchased items from customers